Notification Messages¶

CM000002
Error
Cascade could not save the analysis template because the related file is being used by another process.
Case
Serialization of Analysis Template fails.

CM000003
Error
Cascade could not open the analysis template. The related file may be corrupted.
Case
Deserialization of Analysis Template fails.

CM000004
Error
Cascade could not save the project file because the specified file is being used by another process.
Case
Serialization of Cascade Project fails.

CM000005
Error
Cascade could not open the project file. The file may be corrupted.
Case
Deserialization of Cascade Project fails.

CM000006
Error
Cascade could not save the preferences because the related file is being used by another process.
Case
Serialization of Preference fails.

CM000007
Error
Cascade could not open the preferences. The related file may be corrupted.
Case
Deserialization of Preference fails.

CM000008
Error
Cascade could not open the measurement data. The related file may be corrupted.
Case
Opening Hive file fails.

CM000009
Question
Sample for supervisor cannot be specified for some compounds. Do you want to continue processing with parameter based detection instead of supervised detection for compounds without a supervisor?
Case
On executing Supervised Detection during Reanalysis, there is a transition that does not have a Reference set as a Supervisor.

CM000011
Warning
Not enough samples have been selected for processing. Select multiple samples and try it again.
Case
On performing Supervised Detection, multiple lines are not selected.

CM000012
Question
Do you want to save your changes to the current project file before closing Cascade? Click ‘Yes’ to overwrite the file. Click ‘No’ to close Cascade without saving your changes.
Case
The Application is tryed to close while the project has been modified (and a save destination file is specified)

CM000013
Question
Do you want to save this project before closing Cascade? Click ‘No’ to close Cascade without saving the results.
Case
The Application is tryed to close while the project has been modified (and has never been saved)

CM000014
Warning
The file could not be written because it is being used by another process. Check if another program is using the file and try again.
Case
If the target file is in use when overwriting the file

CM000016
Information
<Version>
Case
On pressed “About Cascade” from the menu bar Help.

CM000017
Question
This project will be overwritten by this process. Do you want to back up this project before overwriting?
Case
Immediately after the Add Raw MS Data button is pressed.

CM000018
Error
The input raw files do not contain enough information, or cannot be read. Make sure all files are not corrupted or contain the required data.
Case
If the file input with Add Raw MS Data does not have the information necessary for analysis.

CM000019
Error
Cascade cannot load the selected layout. Do you want to delete the layout?
Case
On Layout applicaiton fails.

CM000020
Error
Selected analysis template is not available in the current version of Cascade. Do you want to delete the analysis template?
Case
On selected a version of Analysis Template that is not available.

CM000023
Warning
Some compound names are too long or contain symbols that cannot be used as Excel worksheet. Do you want to automatically replace the worksheet name and continue processing?
Case
On exporting to Excel, the sheet name violates Excel restrictions.

CM000026
Error
The selected file cannot be opened because it is not an analysis result of a instrument using LDTD technology.
Case
Data other than LDTD is selected in the file dialog that appears when the Open Analysis Result button is pressed, even though it is an LDTD limited edition.

CM000028
Information
The analysis template when this project was saved has been changed. Therefore, the analysis template at the time of data saving is restored and used as “Restored Template”.
Case
The Analysis Template saved in the analysis file has been changed in Open Analysis Result.

CM000029
Information
The analysis template when this project was saved is outdated. Therefore, the analysis template at the time of data saving is restored and used as “Restored Template”.
Case
The version of the Analysis Template saved in the analysis file is outdated in Open Analysis Result.

CM000030
Information
The analysis template when this project was saved does not exist. Therefore, the analysis template at the time of data saving is temporarily restored and used as “Restored Template”.
Case
The Analysis Template saved in the analysis file is deleted in Open Analysis Result.

CM000031
Warning
An unexpected ISTD setting has been defined. Please reselect ISTD compounds that correspond to target compounds.
Case
When opening analysis results by MS Quant Manager, a compound is found whose transition is partially set to target and partially set to ISTD.

CM000032
Question
File will be permanently deleted. Click ‘OK’ to delete it.”
Case
Immediately after the Remove Selected Layout button is pressed.

CM000033
Question
This template is read-only and cannot be modified. Do you want to save your changes with a different name?
Case
On trying to save a modified Read-only Analysis Template.

CM000034
Warning
The same rule has already been registered and cannot be added.
Case
On adding a rule using Analysis Template Editor, the rule you try to add already exists.

CM000035
Error
Selected Analysis Template is not available in the current version of Cascade. Do you want to delete the analysis template?
Case
The major version or minor version value of the selected Analysis Template in the Analysis Template Editor is greater than
the latest Analysis Template version value in the current Cascade.

CM000036
Question
Selected Analysis Template will be permanently deleted. Click ‘OK’ to delete it.
Case
Immediately after the Delete button is pressed in the Analysis Template Editor.

CM000039
Warning
Some compounds are duplicated in the file (the last one was applied). / Some compounds are not described in the file. / Some compounds are described in the file, but not in the project.
Case
When the Load Saved Setting button is pressed in the ISTD Manager, there are excess, deficiency, or duplication of compounds in the specified file.

CM000040
Error
The ISTD Manager cannot open the file:
Case
A NotSupportedException occurs when the Load Saved Setting button is pressed in ISTD Manager. A problem that occurs because the formats do not match.

CM000041
Error
The ISTD Manager cannot open the file:
Case
When the Load Saved Setting button is pressed on ISTD Manager, an exception other than InvalidEnumArgumentException and NotSupportedException occurs. Problems such as corrupted files.

CM000042
Error
Cascade could not save the file because the specified file is being used by another process.
Case
File export fails when the Save button is pressed on ISTD Manager.

CM000043
Error
You can paste 2 or 4 columns separated by tab.
Case
NotSupportedException occurs when pasting in ISTD Manager.

CM000045
Question
The settings have been changed. Do you want to exit without saving the settings?
Case
Tried to close the Preference Window after the Preference has been changed

CM000049
Error
The input raw files do not contain enough information, or cannot be read. Make sure all files are not corrupted or contain the required data.
Case
An Exception occurs when converting to Hive fromat or reading converted data in New Analysis Wizard.

CM000050
Error
The specified files are not supported by Cascade.
Case
The extension of the Raw File entered in the New Analysis Wizard does not correspond to any of the MS data extensions of each company, or there is no Reader compatible with the Raw File.

CM000054
Tips
This operation will clear the history of manual editing of the chromatogram. If you want to go back before performing this operation, use “Move Snapshot Backward”.
Case
Parameter Based Detection, Supervised Detection, or Peak Clear button is pressed from the Dashboard (if not checked previously).

CM000055
Question
Do you want to save your changes to the current project file? Click ‘Yes’ to overwrite the file. Click ‘No’ to close project without saving your changes.
Case
On tried to close the project while it has been modified (if a save destination file is specified)

CM000056
Question
Do you want to save this project? Click ‘No’ to close project without saving the results.
Case
On tried to close the project with changes made (never saved before).

CM000057
Warning
Cascade cannot open the same project file at the same time.
Case
The file tried to open is already opened by Cascade.

CM000060
Information
Changing the settings in the Preference window will affect the subsequent analysis processing and how the results are displayed. Please note that it will also affect if you open data that you have analyzed and saved in the past.
Case
Before displaying Preference window.

CM000061
Tips
By limiting the display RT range of chromatogram, some of the detected peak areas may be outside the limited RT range. In addition, if peak detection is performed under this limit, the edge of the detected peak may be outside the display area.
Case
On Limit RT Range is used.

CM000062
Information
The following specified text was not found.
Case
No row containing the search keyword was found, or search target columns are hidden.

CM000063
Warning
Calibration curves cannot be drawn because some standard samples are not given a concentration. Do you want to continue anyway?
Case
The Next button was clicked on the Concentration Setting page of the New Analysis Wizard when a line with concentration N/A was included.

CM000066
Information
Only the ISTD settings of the selected method will be loaded/saved.
Case
A warning issued when pressing Load Saved Setting and Save buttons in ISTD Manager. Displayed only when multiple methods exist.

CM000067
Error
The ISTD Manager cannot open the file:
Case
InvalidEnumArgumentException occurs when the Load Saved Setting button is pressed in ISTD Manager.

CM000068
Error
InvalidEnumArgumentException.
Case
InvalidEnumArgumentException occurs on executing paste operation in ISTD Manager.

CM000071
Tips
Not all samples are displayed at once, so change the filters as needed to see the list displayed.
Case
Filter is displayed when you open the New Analysis Wizard’s Reference Setting page.

CM000072
Tips
Not all compounds are displayed at once, so change the filters as needed to see the list displayed.
Case
Filter is displayed when you open the New Analysis Wizard’s Internal Standard Setting page.

CM000073
Tips
Not all samples are displayed at once, so change the filters as needed to see the list displayed.
Case
Filter is displayed when you open the New Analysis Wizard’s Concentration Setting page.

CM000074
Warning
Some settings in “New Analysis Wizard” are incorrect. Please check again items with orange exclamation mark.
Case
The Finish button is pushed when one of the New Analysis Wizard pages causes an error.

CM000075
Error
Elevated users by User Account Control (UAC) cannot start the GUI due to differences in file access permissions.
Case
Trying to start the GUI Application while elevated to administrator.

CM000082
Information
It is not possible to uncheck all the export values.
Case
Trying to uncheck all Matrix Type checkboxes in Export Setting of Analysis Templete Editor

CM000083
Warning
Some compound names contain symbols that cannot be used as file name. Do you want to automatically replace the file name and continue processing?
Case
When selecting csv/tsv in Export Result Table and clicking the Export button, the compound name included in the file name violates Windows restrictions.

CM000084
Warning
Cascade cannot export any Result Tables because there are no rows allowed to export.
Case
Clicking Export Result Table with all rows’ Export checkboxes set to false.

CM000085
Question
Do you want to close the current project file?
Case
When you open a project file and trying to open a new analysis or an existing project file when another project file is already opened without any changes.

CM000086
Warning
Cascade cannot export PDF because there are no rows allowed to export.
Case
Export PDF is clicked with all rows’ Export checkboxes set to false.

CM000087
Error
Cascade could not save the PDF template because the related file is being used by another process.
Case
Serialization of PDF Template fails.

CM000088
Error
Cascade could not open the PDF template. The related file may be corrupted. The default template will be applied.
Case
Deserialization of PDF Template fails.

CM000089
Error
Cascade could not save the internal settings for PDF export because the related file is being used by another process.
Case
Serialization of PDF Setting fails.

CM000090
Error
Cascade could not open the internal file for PDF export. The related file may be corrupted. The default settings will be applied.
Case
Deserialization of PDF Setting fails.

CM000091
Warning
There are too many columns in the table. You can fix it by editing the Column Settings, the format may be corrupted due to line breaks. Do you want to continue exporting anyway?
Case
When exporting a PDF file, a warning message appears if there are too many columns or if a line break is required even for numbers.

CM000092
Warning
Some of the column names in the table are too long. You can fix it by editing the Column Settings, the format may be corrupted due to line breaks. Do you want to continue exporting anyway?
Case
When exporting a PDF file, a warning message appears if a line break is inserted in a column name.

CM000093
Question
Do you want to save this PDF template?
Case
Displayed on exporting, switching templates, etc. when the PDF Template has been changed.

CM000094
Error
Cascade could not open the PDF template because it is not a supported version. The default template will be applied.
Case
Displayed on the PDF Template was successfully loaded but the version was not compatible.

CM000096
Question
Some of the export files already exist. Do you want to replace them?
Case
On Export Result Table or Export Data Matrix, selected csv or tsv and clicked the Export button,
when there is at least one file with the same name as the file to be exported in the folder specified in the folder selection dialog.
On using Export PDF to export multiple PDFs to one folder, at least one file exists having the same name as the file to be exported.

CM000097
Information
The measurement methods in the Result Outlook have been renamed due to the addition of samples using different measurement method.
Case
The measurement method on Result Outlook has been changed to Unspecified because samples measured with different measurement methods were added by Add Raw MS Data to the project with measurement mathods on Result Outlook derived from measurment methods in raw data. (This case only occurs when Grouping Rule is Ignore.)

CM000098
Warning
This measurement method cannot be used. Please set different measurement method name.
Case
When renaming mesurement method on Result Outlook, the renamed measurement method was only blank or spaces.

CM000099
Warning
Measurement method with same name already exists. Please set different measurement method name.
Case
When renaming mesurement method on Result Outlook, the renamed measurement method already existed.

CM000100
Question
The cell styles with overlapping inequality have already been registered. Do you want to remove the existing cell styles and add a new one?
Case
On adding a cell style using Analysis Template Editor, the condition range of some already registered cell styles overlapped with the one you were trying to add.

CM000101
Warning
This compound name cannot be used. Please set different compound name.
Case
When renaming compound on Result Outlook, the renamed compound was only blank or spaces.

CM000102
Warning
Compound with same name already exists. Please set different compound name.
Case
When renaming or resetting compound on Result Outlook, the changed compound name already existed.

CM000103
Question
The selected analysis template rule cannot uniquely identify a sample to be a supervisor. Do you want to continue processing with parameter based detection instead of supervised detection for compounds without a supervisor?
Case
When running Reanalysis with options to respecify reference sample according to the Analysis Template and perform Supervised Detection, reference sample could not be uniquely determined because there were multiple samples that satisfied reference rules.

CM000104
Question
The displayed concentration values and unit will be applied to all other compounds. Do you want to synchronize the concentration values and units?
Case
The Synchronize the concentration values to all compounds checkbox was checked on the Concentration Setting page of the New Analysis Wizard.

CM000110
Information
Library samples were loaded as reference.
Case
When opening analysis results by Traverse MS, there were library samples loaded as reference.

CM000111
Warning
Library samples were loaded as reference. Some library samples were not loaded because they do not contain enough information. / Some library samples were not loaded because they do not contain enough information.
Case
When opening analysis results by Traverse MS, there were library samples without chromatogram such as text format library.

CM000112
Warning
Different expected retention times are assigned within the same compound. The expected retention time that was loaded earlier will be applied. Do you want to continue anyway?
Case
The Finish button was clicked while a warning was displayed (only the expected RTs differed among the loaded compounds) on the Input Raw MS Data page of the New Analysis Wizard.

CM000113
Warning
Different expected retention times are assigned within the same compound. The expected retention time that was loaded earlier will be applied.
Case
When running Add Raw MS Data, only the expected RTs differed among the loaded compounds.

CM000114
Error
Some of files cannot be read due to duplicate or incorrect acquisition settings.
Case
The same transitions were measured with the same compound name in the raw file input to New Analysis Wizard.

CM000115
Question
This process may cause S/N values to be recalculated. Do you want to continue this process?
Case
The Add Raw MS Data button was clicked while LDTD or RapidFire data was being analyzed.

CM000116
Question
Project created with an older version has been opened. Do you want to recalculate S/N values according to the specifications of the current version? Click ‘Yes’ to recalcuate S/N values. Click ‘No’ to keep saved S/N values.
Case
The project file that analyzed LDTD or RapidFire data with Cascade ver.1.1.8 or earlier was opened.

CM000117
Error
Cascade cannot be run on this operating system. Please check again the required operating environment for Cascade.
Case
Trying to start Cascade on Windows Server or Windows Enterprise.

CM000118
Error
Cascade runs only on 64 bit operating systems.
Case
Trying to start Cascade on a non-64-bit OS.

CM000119
Information
The compound names entered are evaluated against the compound names set when defining the measurement method and saved in the raw data. In other words, “Undefined” displayed in the Result Outlook and renamed compounds marked with * are not taken into account here.
Case
On adding an ISTD rule using Analysis Template Editor, the Estimation Type of the rule you try to add was set to “Compound Name”.

CM000120
Warning
The ISTD Manager cannot be used because there are measurement methods with non-unique compound names. To use it, try renaming the compound names in the Result Outlook.
Case
Trying to open ISTD Manager while some measurement methods have non-unique compound names.

CM000121
Error
Analyzing Hive and ABF format files together is not supported, so the input raw files cannot be read.
Case
Hive and ABF format files were input together on the Input Raw MS Data page of the New Analysis Wizard.

Note

Some messages can be hidden by checking “Do not show this message again”. In order to return to default state that all messages are displayed, type %LocalAppData%\Reifycs\Cascade in File Explorer of Windows, delete Message.cfg in the displayed folder, and then restart Cascade.